Atlantis DISKMASTER NAS65020 Guide d'installation télécharger pdf (Page 34)

PORTE/Bottoni

MEANING

Rear Panel

Power Jack

Connect the supplied power adapter (DC, 5V@2A) to

this jack.

Power Switch

A Power ON/OFF switch.

RJ45 Port

Connect an UTP Ethernet cable to this port when

connecting to a PC or an office/home network of

10Mbps or 100Mbps.

Side Panel

WPS

USB Off

Press USB off button till LED flashing, then can

remove USB storage when LED stop flashing.

Press WPS for launch WPS process.

Reset

Please press both reset button for 5-10 seconds.

USB

Please connect a Data Storage.

1.7 Default Settings

The TCP/IP protocol stack and Ethernet network adapter must be installed. If not,

please refer to MS Windows relative manuals.

Before you configure this device you need to know the following default settings:

 Password: atlantis

 IP address: by DHCP, (If a DHCP server isn’t available in the network,

the DiskMaster will use 192.168.1.1 and Subnet Mask

255.255.255.0).

There is a Reset button on the back of DiskMaster which will

help return its IP, System ID, System Password and DHCP to

their factory default values. Hold at least 5 secs to restore to

Default.

In order to obtain a full reset please click Reset button here:

Advanced Tools->Reset configuration to Factory

Defaults.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Pas de commentaire

Atlantis DISKMASTER NAS65020 Guide d'installation Page 34